UMEC UP2002-01 AC ADAPTER 24V dc 8.5A 200W NEW 3Pin XLR Femail

UMEC UP2002-01AC ADAPTER 24V dc 8.5A 200W NEW 3Pin XLR Femail Digipos GY9802 ITE Power supply for the Digi-PSU200, Digi-PSU250, Digi-PSU2000 1x Adaptor only
cULus E144357 E178008

Please Note : This item present here for USA and Canadian Buyers only. If you are located out side of USA / Canada then please you need to pay Extra shipping charges

Compatible: DigiPos Digi-PSU250 AC ADAPTER 24Vdc 8.4A
 AC Input: 100-240VAC ~ 3.3A, 50-60Hz.
No kettle/power lead is supplied.

DC Output: DC 24V === 8.5A (8.4A 8.33A).
Connector: 3 Pin Standared XLR with lock pin From left as shown in picture Pin 1 - 2 - 3
Pin Hole 2.7 x Dia16mm x L 12.5 mm

Pin 1 = ve ( 24V)
Pin 2, 3 =GND (-Ve 24V)
Keywords: ALIMENTATION POUR DIGIPOS RETAIL BLADE DIGI PSU250
PC-POS Digipsu250 24V/8.4A Retail Blade, Retail Core, Retail Active and Dynamic Blade.

To use with: DigiPOS PCPOS acDigi-PSU200, Digi-PSU250, Digi-PSU2000

UP2002-01
�� 200W Adapter
�� Meet IEC1000-3-2 Harmonic Regulation
�� Universal AC Input Voltage
�� Power Saving Feature
�� UL, CUL, TUV, CE, CB approved.
�� Meet FCC Class A, CISPR22 Class A
�� Protection on OVP, OTP, SCP, OPP
�� Short Protection Latch OFF
SPECIFICATIONS
APPLICATION:
�� POS
Voltage AC100V ~ 264V
Current 4A typ. (AC IN 110V), 2A typ. (AC IN 220V)
Frequency 50/60 Hz (47 ~ 63Hz)
Efficiency (%) 85%Typical, at 115Vac Full Load
Power Factor 0.98 typ. (AC 100V Full Load)/0.92 typ. (AC 230V Full Load)
INPUT
Power Saving Input watt is less than 5Watt at 230Vac no load.
Voltage (V) 24V
Max. Load (A) 8.5A
Min. Load (A) 0A
Line Reg. (%) /-2%
Load Reg.(%) /-5%
Cross Reg.(%) /-5%
Ripple & Noise (mV) 480mV
Hold-Up Time (mS) 8mS typ. at AC 115V Full Load
OUTPUT
Rise Time (mS) 20mS MAX. at Full Load
PROTECTION Over Power (%) 130% Typical
CIRCUIT Over Voltage (V) 31V
Operating Temp. 0 Degree C ~40 Degree C
ENVIRONMENT Storage Temp. -20 Degree C ~ 80 Degree C
Humidity Range 10% ~ 90% RH
Dimension 215(L)*100(W)*50(H) mm
Safety UL, CUL, TUV, CE, CB approved.
RFI/EMI Meet FCC Class A, CISPR22 Class A
SAFETY & NOISE
REGULATIONS
Harmonic Attenuator Meet IEC1000-3-2

Information's are here for your reference only and accuracy can not be guaranteed.

Copyright 2012 - 2013All rights reserved