Gigabit 48V PoE Injector Adapter Power Over Ethernet 802.3at af UBNT AP 1000Mbps Country/Region of Manufacture: China

Gigabit 48V PoE Injector Adapter Power Over Ethernet 802.3at af UBNT AP 1000Mbps

Country/Region of Manufacture:
China
Type:
Poe Injector
MPN:
Does Not Apply
Connector A:
Ethernet (RJ-45) Female
Connector B:
Ethernet (RJ-45) Female
Brand:
DSLRKIT
UPC:
Does not apply
Gigabit 48V 24watt Passive PoE Injector

compatible 802.3af / 802.3at

compatible 10/100/1000 Ethernet











for Raspberry Pi 3B+(3B Plus)

Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.



for UBNT AP
UAP-AC-PRO
UAP-AC-EDU,UAP-HD
UAP-AC-IW ,UAP-AC-IW-PRO
Please do not connect UAP-AC-LR and UAP-AC-LITE to this switch,orelse it will burn your UAP-AC-LR/UAP-AC-LITE.


This injector can power 802.3af compatible devices without extra adapters. Just plug the network cable(not included) into your network switch and the "LAN" port, then plug the network cable to your device into the "PoE" port with your existing network cable.

This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the "PoE" port, this will damage your device.

This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, don't plug the "PoE" side into anything that isn't ready for it.

Compatible all 802.3af PoE power device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....

Features:
Compatible 10/100/1000 Ethernet

* Cost Saving, No Power Cabling for WLAN AP, IP Phone and any supported IEEE802.3af Powered Device
* Meeting IEEE 802.3af standards and more sufficiently is able to provide power to PD devices
* Small lightweight plastic enclosure
* Built-in universal 100-240V AC switching power supply
* Compatible 10/100/1000 Ethernet,Standard RJ45 Cat.5 Ethernet data input and output
* Easy, convenient, and simple to use

Specification:
Compatible Standards: 802.3af and 802.3at
Compatible 10/100/1000 Ethernet

CAT5 Ethernet Pin Usage: Data: 1,2,3,4,5,6,7,8 Power: +(4,5),-(7,8)
LED: Power
Voltage Input: AC 100-240 V 50/60Hz
Voltage Output: DC48V 24watt
Dimension : 85 x 47 x 54mm
Weight -- 140g

​Compatible 48V Ubiquiti PoE:

UBNT AP/UAP

UAP-LR
UAP-AC-LR
UAP-AC-LITE
NanoStation M2 / NSM2
NanoStation M3 / NSM3
NanoStation M365 / NSM365
NanoStation M5 / NSM5
NanoStation Loco M2
NanoStation Loco M5
NanoStation Loco M9
Ubiquiti Rocket M5,M2,M9,M900
Ubiquiti Rocket M3/M365
Ubiquiti Rocket M2
Ubiquiti Rocket M9/M900
NanoBridge NBM9, NB-2G18, NBM3, NBM365
PowerBeam M5 PBE-M5-300-ISO
airGrid M AG-HP-2G16, AG-HP-2G20, AG-HP-5G23, AG-HP-5G27
LiteBeam M LBE-M5-23, LBE-5AC-23, LBE-5AC-16-120
NanoBeam M NBE-M2-13, NBE-M5-16, NBE-M5-19
PowerBeam PBE-M5-300, PBE-M2-400
airMAX YAGI Antenna AMY-9M16
LiteBeam LBE-M5-23
(It is not compatible with Cisco air-ap2802i-E-k9)

Item Included:

Gigabit 48V PoE Injector Adapter x1(Raspberry Pi，PoE Splitter and PoE HAT not included)