Enermax EG701AX-VE ATX Desktop Power Supply NoiseTaker II 600w PSU
Condition: New - Like New - Pulled from working enviroment
Content: One Power Supply unit only
Please Note : This item present here for USA and Canadian Buyers only. If you are located out side of USA / Canada then please you must need to pay Extra shipping charges.
Model: EG701AX-VE , EG701AX-VE(W)
P/N.: 8010119C672C
InPut Voltage: Use world wide
100-240VAC ~ 50/60Hz. 4A-9.5A
OutPut Votage:
Rails EG701AX-VE (W) (24P) SFMA Ver 2.0 SFCA
12v 1 18A
12v 2 18A (1 2 combine pw 35A)
-12v 0.8A
5v 34A
5v sb 2.5A
3.3v 34A
Connectors:
20 4 Pins Main Power: 1 (support 24P and 20P MB)
12V 4pins atx CPU : 1
6 Pins PCI Express : 2
Serial ATA : 4
HDD Power :7
FDD Power : 2
Fan Monitor: 1
Best EMI Shielding
Maximum Power: 600W (support both 20pins and 24pins DUAL Core and Dual CPU System motherboards intel Pentium D EE And AMD Athlon 64 x 2)
Efficiency: 80%
Active PFC: Yes
Input Voltage: 90V~265V (Auto Adjusted)
Input Frequency Range: 47Hz~63Hz
Input Current: 40A/115V and 80A/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: 5V: 5.5V~7.0V; 3.3V:3.76V~4.3V; 12V & 12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: 3.3V : 55A (max); 5V: 48A (max); 12V1 & 12V2: 20A (max)
Over Temperature Protection: Operating Ambient 10C~40C, Storage Ambient -40C~70C
Humidity:
Operating : to 85% relative humidity, non condensing at 25C
Storage: to 95% relative humidity, non condensing at 50C
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25C ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TV, CB
Dimension: W150 x H86 x D140 (mm)
Weight: 3.6Kgs
features
- smart fan function
The Smart Fan technology was developed by the folks at Enermax to protect your investment. After your system shutdown, the two ball earing fans continue to run for another 2 mins to cool off your power supply and components . It also has a heat sensor that will allow the fans to run for more then 2 mins if the temp is greater then 40c after the 2 min. This will greatly increase the life your power supply and components.
- running impressively quiet and cool
- dual 12V Rails
Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety requirements. It also separate the motherboard rails and video card rails to ensure maximum power to your PCI Express video card.
- high efficiency (80%)
High efficiency is achieve by using using high quality components and the skills of our designer to maximizes your power supply output and minimize wasted power. Efficiency is the measure of how much of the 100% power going in to the PSU is being new up and the unnew power dissipate into heat through the heatsink. Lower efficiency means that more power is being wasted and also the PSU will generate more heat. .
- ring core technology
Effectively prevents electro-magnetic pulse leaking from switching power supply to appliances that are being attached to the same power source, i.e. AC wall plug..
- protection
Enermax has one of the highest protection standard on the market today, due to our advance design we offer the following type of protections:
OCP -Over Current Protection, UCP -Under Current Protection, OVP - Over Voltage Protection, OLP -Over Load Protection, OTP - Over Temperature Protection, SCP - Short Circuits Protection.
Description:
The Enermax Noisetaker EG701AX-VE 600W power supply is as rock solid as they come. Peformance-wise, this power supply leaves absolutely nothing to be desired
decided to build a new gaming computer. You've done your homework on just about every option available. You've researched processors, weighing the differences between Intel's Pentium 4 and AMD's Athlon 64. You've looked into the different video card options
The latest ATX standard was divised in order to guarantee that new power hungry computer technologies such as PCI-Express, DDR2, and 3ghz processors would get the power they need in order to operate correctly. The most significant difference between ATX v1.3 and ATX v2.0 involves the splitting of the 12V rail. ATX v2.0 requires that in cases where the current requirement for 12V exceeds 18A, a second 12V rail must be included. By including independent 12V rails, a power supply based on the ATX v2.0 standard can provide stable and clean dedicated power to the motherboard/CPU on one rail and additional peripherals on the other.
New to the ATX v2.0 standard is the change from a 20 pin (2x10) main power connector to a 24 pin (2x12) main power connector. This change was made in order to support the increased power consumption of PCI-Express graphics cards. Additionally, ATX v2.0 standardizes SATA power connectors, output protections, accoustic noise levels, and minimum efficiency.
The NoiseTaker II PSU from Enermax worked flawless from the get go. All of the features and specs worked the way they should have. Install is a breeze and the thing even will looks cool! If you want a good SLI or gaming PSU then look no where else then here the Enermax NoiseTaker II.
■ Information's are here for your reference only and accuracy can not be guaranteed.
■ Item can be similar if exact match not available.
■ Please Research yourself with compatibility of your apparatus.
Copyright 2010 - 2011All rights reserved
