EnermaxEG425P-VEATX SFCA Desktop Power Supply NoiseTaker 420w PSU
Condition: New - Like New - Pulled from working enviroment
Content: One Power Supply unit only
Please Note :This item present here forUSA and Canadian Buyers only. If you are located out side of USA / Canada then please you must need to payExtra shipping charges.
Model: EG425P-VE
P/N.: 801001796922
InPut Voltage: Use world wide
115-230VAC ~ 50/60Hz. 10A-5A
OutPut Votage:
Rails EG701AX-VE (W) (24P) SFMA Ver 2.0 SFCA
12v === 1 - 15A
12v === 2 - 15A
-12v === 0.8A
5v === 36A
5vsb === 2.5A
3.3v === 32A
Connectors:
20 Pins Main Power: 1
12V 4pins atx CPU : 1
6 Pins PCI Express : 2
Serial ATA : 2
HDD Power : 6
FDD Power : 2
Fan Monitor: 1
Best EMI Shielding
Safety: Approval UL, cUL, TV, CB
Dimension: W150 x H86 x D140 (mm)
Weight: 3.6Kgs
features
- smart fan function
The Smart Fan technology was developed by the folks at Enermax to protect your investment. After your system shutdown, the two ball earing fans continue to run for another 2 mins to cool off your power supply and components . It also has a heat sensor that will allow the fans to run for more then 2 mins if the temp is greater then 40c after the 2 min. This will greatly increase the life your power supply and components.
- running impressively quiet and cool
- dual 12V Rails
Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety requirements. It also separate the motherboard rails and video card rails to ensure maximum power to your PCI Express video card.
- high efficiency (80%)
High efficiency is achieve by using using high quality components and the skills of our designer to maximizes your power supply output and minimize wasted power. Efficiency is the measure of how much of the 100% power going in to the PSU is being new up and the unnew power dissipate into heat through the heatsink. Lower efficiency means that more power is being wasted and also the PSU will generate more heat. .
- protection
Enermax has one of the highest protection standard on the market today, due to our advance design we offer the following type of protections:
OCP -Over Current Protection, UCP -Under Current Protection, OVP - Over Voltage Protection, OLP -Over Load Protection, OTP - Over Temperature Protection, SCP - Short Circuits Protection.
Description:
The Enermax Noisetaker EG425P-VE 420W power supply is as rock solid as they come. Peformance-wise, this power supply leaves absolutely nothing to be desired
decided to build a new gaming computer. You've done your homework on just about every option available. You've researched processors, weighing the differences between Intel's Pentium 4 and AMD's Athlon 64. You've looked into the different video card options
The latest ATX standard was divised in order to guarantee that new power hungry computer technologies such as PCI-Express, DDR2, and 3ghz processors would get the power they need in order to operate correctly. The most significant difference between ATX v1.3 and ATX v2.0 involves the splitting of the 12V rail. ATX v2.0 requires that in cases where the current requirement for 12V exceeds 18A, a second 12V rail must be included. By including independent 12V rails, a power supply based on the ATX v2.0 standard can provide stable and clean dedicated power to the motherboard/CPU on one rail and additional peripherals on the other.
File Photo
New to the ATX v2.0 standard is the change from a 20 pin (2x10) main power connector to a 24 pin (2x12) main power connector. This change was made in order to support the increased power consumption of PCI-Express graphics cards. Additionally, ATX v2.0 standardizes SATA power connectors, output protections, accoustic noise levels, and minimum efficiency.
The NoiseTaker PSU from Enermax worked flawless from the get go. All of the features and specs worked the way they should have. Install is a breeze and the thing even will looks cool! If you want a good SLI or gaming PSU then look no where else then here the Enermax NoiseTaker.
Smart Fan:
After PC shuts down, cooling fans keep running for at least 2 minutes to effectively cool down parts and hardware inside PSU and PC case. Thus, ensure longer product life time of power supply and hardware inside PC case.
Separate 12V Rails:
Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards. Meet UL 240VA safety requirements.
ATX 12V v1.3 Compatible:
Support latest P4 and Athlon 64 platforms. For P4 platforms use 865 (Springdale) & 875 (Canterwood) chipsets and even new P4 Prescott and AMD Athlon 64 or later CPU.
S-ATA Connectors:
Connect your system to the faster S-ATA interface for better performance.
Manual & Automatic Fan Speed Control:
Automatic controlled by thermostat plus rheostat control. Enable users to keep the balance between cooling effect and acoustic noise.
Extra Power Connector:
Extra 4-pin power connector provides high-end graphic card with stable current.
Reliability:
OCP, UVP, OVP, OLP, OTP, and SCP circuits ensure system well-guarded from any dangers. Maximize safety for your hardware and valuable data.
Copper-Shielding:
Effectively reduces electro-magnetic interference that might affect MB and CPU from normal operation. (Valid for models with 370W and higher total power)
Dual Fan:
The best cooling method for PC system, and is strongly suggested by AMD.
Silence:
Acoustic noise is successfully reduced with two fans giving more airflow in less rpm and smooth mechanical design of fan guards.
FM & FC Functions:
RPM signal of 8cm exhaust fan is provided.
■ Information's are here for your reference only and accuracy can not be guaranteed.
■ Item can be similar if exact match not available.
■ Please Research yourself with compatibility of your apparatus.
Copyright 2011All rights reserved
