DSLRKIT 6 Ports 4 PoE Injector Power Over Ethernet Switch without Power Adapter Model: MID4P2U Modified Item: No Cus

DSLRKIT 6 Ports 4 PoE Injector Power Over Ethernet Switch without Power Adapter

Model:
MID4P2U
Modified Item:
No
Custom Bundle:
No
Number of LAN Ports:
6
Layer:
2
Ethernet Technology:
Fast Ethernet (100-Mbit/s)
Type:
Ethernet Switch
MPN:
Does not apply
Maximum Data Transfer Rate:
100Mbps
Brand:
DSLRKIT
Form Factor:
Standalone
Country/Region of Manufacture:
China
Network Management Type:
Unmanaged
UPC:
Does not apply
Number of Network Ports:
6
Non-Domestic Product:
No
Notice!Notice!Notice!

This item do not include the power adapter, you need to buy an extra power adapter according to your requirement. So it only suitable for PoE professional customers.

52V Power adapter links:
52V1.85A

52V2.7A

48V Power adapter links:
48V2A

48V3A

Please select the correct Power adapter by POE device，
802.3af (802.3at Type 1) PoE device, We suggest DC 48V power adapter.
802.3at Type 2 PoE+(plus) device, We suggest DC52V power adapter.
Please refer to the Wikipedia "Power over Ethernet" section, under the "Standard implementation" paragraph.

(Usually for ensure the power supply is stable for a long time. it is recommended not to let the power load exceeds 80% of nominal value. so please choose a more suitable power adapter according to the number of camera you intend to connect and the total power. For example, you intend to connect 6 cameras, while each camera power consumption is 12Watt, the total power consumption is 6x12=72watt. Then select the 96Watt (48V2A) power adapter is enough. if the total power consumption is over 80watt then it is recommended to choose 144W (48V3A) power adapter.)

If your camera is with word “12V/PoE” as this picture shows, then please select 48V Power Adapter, do not select 12V Power Adapter.
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V PoE Ethernet port:






DSLRKIT MID4P2U Passive PoE Injector Switch

Power supply not included
Supports 12~55V DC power supply
DC IN port 5.5X2.5mm(2.5mm plug can be plugged into the 2.1mm receptable), inside positive (+) outside negative (-)

When connecting 4 IEEE 802.3af standard POE IP CAMERA,The maximum power can reach 60Watt. In order to ensure stable power supply for work, please use the output at least 80Watt power adapter, we recommend using the 48V 2A power adapter in following link:

48V 2A 96W AC to DC Power Supply Adapter for PoE Switch Injector48V 2A 96W AC to DC Power Supply Adapter for PoE Switch Injector



6 Ports (2Uplink, 4 PoE) 10/100Mbps

Midspan Mode-B Unsolicited Power(4,5+/7,8-)

Wall Mount



This is an Passive Power Over Ethernet of 6 port 10 / 100Mbps-T Ethernet switches, including 4 unsolicited PoE Ethernet ports and 2Uplink ports. DC port apply 12~55V power supply adapter(not included), any one of the 4 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.

This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "Power Link 1~4" port using 4,5,7,8 pin as power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 1~4" port, this will damage your device.

Gigabit(1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.

Features:

6 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 4-Ports PoE function
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Supports 12~55V DC power supply
Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
Full/half duplex transfer mode for each port.


Specification:

ALL Port: Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable.
Power Link Port 1-4: any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs)

Power LED LED ON: power on. LED OUT: power off 　
Yellow Light LINK/ACT LED ON Indicates the port is connected to a network device and has been started
LED OFF Indicates that this port is not connected to a network device or has not been started

Standard IEEE 802.3 10BASE-T Ethernet 　 　
IEEE 802.3u 100BASE-TX Fast Ethernet 　
IEEE 802.3x Full-Duplex flow control 　
Protocol CSMA/CD Ethernet 　 　 　 　
Data Transfer Rate Ethernet: 10Mbps (Half Duplex)，20Mbps (Full Duplex)
Fast Ethernet: 100Mbps (Half Duplex) ，200Mbps (Full Duplex)
Network Media(Cable) 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
PoE Power on RJ45 Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8
DC Output: 12-55V, Per port Max 1A,
Number of Ports 6 x 10/100Mbps Auto-Negotiation RJ45 ports with 4 PoE enabled (port-1 ~ port-4)
Power Input Supports INPUT 12-55V DC power supply 　
Power DC port 5.5 x 2.5mm(2.5mm plug can be plugged into the 2.1mm receptable), inside positive (+) outside negative (-)
Power Consumption 3.2Watts (max. no)PDconnected) 　 　
According to the actual power consumption of equipment
Temperature Operation Temperature:0 ~40℃ (32 ~104℉ ) 　
Storage Temperature: -40 ~70℃(-40 ~158℉) 　
Humidity Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing
Product Dimensions 132mm W x 66mm D x 32mm H 　 　
RAM Register Capacity 64K bytes per device 　 　 　
MAC Address List 1K entries per device 　 　 　
Frame Forward Rate 10Mbps Ethernet: 14880pps/Port 　 　
100Mbps Ethernet: 14880pps/Port 　 　

Item Included:

6pots 4PoE Unsolicited(Passive) PoE switch x1
(Power supply not included)

12 Months Warranty from the date of purchase.