AULT MW116 AC ADAPTER 12VDC 6.67A 4PIN Upper two ve SWITCHING Medical Power Supply for MRI LCD display
Condition: New - Excellent
Content: One Adapter only
TYPE: Universal Input Desktop Style
Manufacturer: Ault / National Display Systems / Medical device Manufacturer / Medical Power Supply
Model Number: MW116
Type / Part Number: KA1249F02, KA1249F53 Rev. B
Compatible: HPA-601250U3
Input Voltage: VAC 100 - 240V ~ 50-60Hz 1.0A
Output: DC 12V === 6.67A
Connector: 4 pin 10mm Male round Mini din plug
Pin 1,2 = 12Vdc
Pin 3,4 = GND
Shield = NC
Supplier: Ault (SL Power)
Mechanical Format: Externals
Outputs: Single
Type: AC/DC
Technology: Switch Mode
measures: 5.08" x 3.05" x 1.59" inch
weighs: 13oz
Dimension: 13 x 7.7 x 4.5 cm approx.
Weight: 710 grams.
Compatible and to use with:
MRI LCD displays,
life care patient monitors,
home care diagnostic systems and
heart-assist blood pumps
radiologist high-end, hi-res monitor
Description : Universal 60 to 90W Series power supply. The desktop-style MW116 features 100Vac to 250Vac universal input in an IEC320 C18 non-grounded configuration. The MW116 Series This is 12V output model and includes an internal primary current fuse as well as inrush limiting. The MW116 measures 5.08" x 3.05" x 1.59" and weighs 13oz. It meets TUV/IEC601 requirements, as well as UL2601 and CSA601. Ault believes that the systems will be popular for powering MRI LCD displays, life care patient monitors, home care diagnostic systems and heart-assist blood pumps.
Features : Include foldback over-current protection and short-circuit protection. Transient output response is 0.5 milliseconds for a 50-percent load change, and the unit's holdup time is 10 milliseconds throughout its entire output range. All models have low output ripple and impact-resistant polycarbonate enclosure.
■ Also Compatible With Some other brands and models.
■ BE AWARE THAT NON-MAJOR MAKES SUCH AS LI-SHIN, LITEON, DELTA ETC MAKE THE SAME GENERIC POWER SUPPLY FOR A NUMBER OF LAPTOP MAKERS. EVEN IF YOU SEE THE SAME PART NUMBER LISTED ABOVE FROM YOUR DEAD AC ADAPTER, IT DOES NOT NECESSARILY MEAN THAT THE ONE LISTED WILL HAVE THE SAME OUTPUT CONNECTOR OR LEAD. PLEASE MAKE SURE THAT YOU EITHER CHECK THE CONNECTOR TYPE PRIOR TO BUYING, OR ARE PREPARED TO CHANGE/SOLDER THE CONNECTOR ON THE END- WE WILL ONLY REPLACE DEFECTIVE ITEMS. POWER SUPPLIES BY MAJORS SUCH AS HP,COMPAQ, DELL, TOSHIBA ETC WILL BE 100% COMPATIBLE IF YOUR DEAD ADAPTER HAS THE SAME PART NUMBER AS THE ITEM LISTED.
■ PLEASE NOTE THAT WE DO NOT SUPPLY SECOND USER AC POWER CABLES WITH ANY AC ADAPTER - ONE WILL NOT BE INCLUDED (EVEN IF IT SHOWN IN THE LIBRARY PHOTO UNLESS SPECIFICALLY MENTIONED ABOVE).
■ (Item can be similar if exact match not available)
■ Please Research yourself with compatibility of your apparatus.
■ Some times Part no. Model no. or serial no. may or may not same but product will be compatible.
■ Please check product documentation for compatibility prior to purchase.
■ Information's are here for your reference only and accuracy can not be guaranteed.
Copyright 2007 - 2012 All rights reserved
All orders ship to worldwide.
